Studio Lighting (part 1)
Accordingly, studio lighting takes many forms. As a matter of fact, there are flashlights, continuous lighting and strobe lighting.
As a result, you have to consider which benefits you best.
In this case, Flashguns used off camera.
Likewise, as the name suggests the lighting does not change although it can be dimmed or brightened.
Accordingly, this normally has a modelling light that allows you to judge the final lighting setup. In addition, it has a strobe light that supplies the actual lighting for the subject when fired.
When I started the business I choose Stobe Lighting. For this reason. that it was a portable unit. In this case, the units are mains electricity or battery powered. You can also use a variety of light modifiers over the strobe to soften the light.
Moreover, all forms of studio lighting require setting up for light level and colour balance. That is to say, to do this accurately you need a light meter and a using a grey card. If you don’t do this then you will get inferior results. Must be remembered, each light requires setting up individually to produce the effect the photographer is looking for.
You can use 1 or multiples of, in most cases, you would use more than 1. In this case, the ideal studio lights for portraits is four.
1. would be the main/key light.
2. would be your fill light
3. would be your hair light
4. would be your backdrop light
For this reason, these lighting setups are normally used for coloured backdrops.
Generally speaking, if you’re using a white background, you remove the hair and backdrop lights. These then get placed pointing at the white backdrop.
In addition, with the lights in position and set to the levels required, the cameras set to the settings. In this case, the cameras set to the main/key light setting.
Watch out for part two. Want to know more then drop me a line.